Citron

Blog

Updates from the Citron team

·3 min

Cretex Medical Acquires the Mold Design Business of Design Phactory

The Minnesota contract manufacturer has added an injection mold design firm, five months after buying assets of a mold builder.

Device teams that buy molded components tend to spend their qualification effort on the molder and the resin, yet many of the choices that set a part's dimensions and cosmetics are made earlier, by whoever designs the mold. Cretex Medical has now brought that step in-house. The company announced on…

Read more
·9 min

Using Heat Shrink Sizing to Solve for Braid Show-Through

A supplier's published root-cause case and a university study of a neurovascular shaft show how much of a reflow process window is set before the heater turns on.

A global medical device company building a braided catheter shaft ran into a reflow problem that its heat shrink supplier, Zeus, later wrote up as a case study. After lamination, the braid was showing through the thermoplastic jacket and leaving blisters along the shaft. According to the case…

Read more
·3 min

Quasar Medical Takes a Minority Stake in CathPrint, a Developer of Flex Circuits for Catheter Shafts

Quasar Medical, a contract developer and manufacturer of minimally invasive devices, announced on November 10 that it has made a minority investment in CathPrint, a Swedish company that builds catheter electronics on flexible printed circuits. Per [Quasar's…

Read more
·3 min

Nitinol Prototyping Under a Bigger Roof: Confluent Acquires Northern Nitinol

The Eden Prairie design and prototyping company joins a contract manufacturer that makes nitinol components, catheters and implants at production scale.

Every team that has shape-set a nitinol prototype eventually has to make the same part again, at volume, with every step written down. That handoff is the backdrop for an acquisition Confluent Medical Technologies announced on November 6. The Scottsdale, Arizona, contract manufacturer has acquired

Read more
·4 min

Ingersoll Rand Acquires IVEK, a Vermont Maker of Ceramic Dispensing Pumps

In 1979, Vernon Zeitz founded IVEK Corporation in North Springfield, Vermont, on the idea, as the company's history page puts it, that "exceptional control of small volumes of liquid for medical and industrial applications has value in the marketplace." Forty-seven years later, the family-owned…

Read more
·3 min

Wrapped, Not Extruded: Junkosha's New Catheter Liner

Junkosha introduced a liner made by wrapping engineered PTFE tape around a mandrel, and the data worth asking for is the same data any liner change needs.

One sentence in Junkosha's MD&M Midwest announcement caught my eye: "The process involves wrapping PTFE film around a mandrel to form the liner wall, rather than extruding a complete tube."

Read more
·9 min

October 2026 in Medtech Components: Consolidation, New Plants and an Open Fluoropolymer Question

October's supplier, OEM, regulatory and research news for people who design, build and buy device components, with sources and a note on why each item matters.

Read more
·2 min

M&M International Plans a Costa Rica Plant for Stainless Medical Tubing

Anyone who has specified small-diameter stainless tubing for a catheter or a needle eventually learns where that tubing is made. M&M International, the Edison, New Jersey, tubing maker, announced on October 21 that it will open a new manufacturing facility in Costa Rica.

Read more
·4 min

Dymax and the Problem of Glue You Can't See

Dymax's medical adhesive data sheets lead with cure speed, and the numbers are striking. Its 1193-M-SV05 needle-bonding adhesive reaches fixture in 0.2 seconds under one of Dymax's own BlueWave® LED lamps at 10 W/cm², with full cure typically taking three to five times longer.

Read more
·7 min

Supplier Spotlight: How a Wire-Recorder Company Ended Up Melting Nitinol

A company that started in 1946 making magnetic recording wire now melts its own nitinol. A look at Fort Wayne Metals, from in-house melting to DFT wire, HHS tube and the PRIME ingot partnership.

Read more
·5 min

The Future is Peelable

Zeus makes the liners and heat shrink inside many catheters, but its most interesting work is on consumables that never ship in the device: peelable fusing sleeves, expanding mandrels and ever-thinner walls.

Read more
·1 min

Resonetics Opens New Manufacturing Operation in Brookfield, Connecticut

Town officials toured Resonetics' operation at Berkshire Corporate Park in Brookfield, Connecticut, on August 5, 2026. The Brookfield Economic Development Office called it a grand opening. People from the Greater Danbury Chamber of Commerce were on the tour.

Read more
·1 min

Applied Plastics Names Brian Hanley President as Barrett Transitions

Brian Hanley joined Applied Plastics as president on August 13, 2026. Tom Barrett stays chief executive through the end of 2026 and will work with him during that handoff. Barrett said he will also stay involved as an operating partner at Vance Street Capital.

Read more
·1 min

Corvention Clears FDA for UHP Balloon

Alan Zajarias used Corvention's KardiaPSI balloon catheter in St. Louis on June 24, 2026. Corvention called that the first U.S. case, and the start of a limited commercial launch. The company is in Flagstaff, Arizona.

Read more
·1 min

Fort Wayne Metals Announces $18.5M Investment and 150 New Jobs Post-Acquisition

Fort Wayne Metals will spend $18.5 million and add 150 jobs in northeast Indiana. The company confirmed that on July 10, 2026. Axel Johnson Inc. had completed the purchase from the Glaze family on July 1. The headquarters stays in Fort Wayne.

Read more
·1 min

Junkosha Names 2026 Technology Innovator of the Year Award Winners

Junkosha named Dr. Vishal Gupta of Anchor Balloon the late-phase winner of its Technology Innovator of the Year award, and Peter Besselink of Memory Metal Holland the early-phase winner. The ceremony was a YouTube livestream on June 17, 2026.

Read more
·1 min

Zeus Launches XpanCore Mandrels for Hypotube Assembly

Zeus launched XpanCore mandrels on June 10, 2026, from Orangeburg, South Carolina. Heat expands the mandrel and presses a liner out against the inside of a laser-cut hypotube. Zeus says that takes the place of a pressurized system for seating the liner.

Read more
·1 min

Ulbrich Invests $9M in Wallingford Facility Expansion

Ulbrich broke ground on June 18, 2026, on a 14,500-square-foot addition at its Wallingford, Connecticut, plant. The $9 million also buys a stretch-bend-leveling line from Burghardt + Schmidt in Germany. Ulbrich expects to finish by May 2027.

Read more
·1 min

Welcome to Citron

Citron is an index of medical device components from suppliers. A search can use a dimension, a material, or a property. The index includes tubing, wire, and coatings.

Read more