Citron
All posts
·7 min

Supplier Spotlight: How a Wire-Recorder Company Ended Up Melting Nitinol

In 1946, an engineer named Ardelle Glaze started a company to make magnetic recording wire for the wire recorders of the day. During World War II he had worked on improving wire drawing, and recording wire was a natural place to put that to use. That original business later changed hands, and the format it served has long since faded, but drawing metal into very fine, very consistent wire turned out to be a skill with a long shelf life.

In 1970 Glaze founded Fort Wayne Metals Research Products. His son Scott Glaze led it from 1985, and the family ran the business for more than half a century. Today Fort Wayne Metals employs more than 1,400 people, including nearly 1,300 in Fort Wayne, 72 in nearby Columbia City and 80 at two sites in Ohio. Its website lists 12 facilities in the U.S. and two in Europe, more than 100 alloys, and exports to more than 45 countries.

Into medicine, and into nitinol

The wire Fort Wayne Metals is best known for now goes into bodies. Nitinol, the nickel-titanium alloy that remembers its shape, is the metal inside self-expanding stents, heart valve frames, retrieval baskets and many guidewires. The company started working with it in 1991.

In 2012 it opened its own melt facility, and with it took control of the whole chain, from ingot to finished wire. The melt shop runs both plasma arc melting and vacuum arc remelting in-house. Both are ways of melting and re-melting metal in a tightly controlled atmosphere, and for an alloy as sensitive to its exact nickel-titanium balance as nitinol, that control is much of the game. That full chain is what got the company Medtronic's 2025 Supplier Innovation Excellence Award, announced in January.

Melting in-house is largely about cleanliness. Inclusions are tiny non-metallic particles left in the metal, and in a part that flexes millions of times they're a common place for cracks to start. Fort Wayne Metals sells two grades. GEN I is standard ASTM F2063 nitinol, with a maximum inclusion size of 39 μm. GEN II, called Altus™, cuts that limit to 20 μm and is aimed at neurovascular stents and other parts that need very long fatigue life.

Scaling the melt

Capacity followed demand. In December 2024 the company said its melted nitinol output had doubled from 2022 to 2024 and was set to double again in 2025, after a plasma arc furnace upgrade and the addition of a second VAR furnace. Over the previous decade, it says, it had supplied more than 650,000 pounds of its own melted nitinol in wire form. Once that second furnace came online in early 2025, Fort Wayne Metals said it could melt a million pounds per year. It also began melting nitinol into bar, strip and sheet, in sizes from 0.0005 inch to about 2 inches in diameter.

Two metals, one wire

The old wire-drawing know-how shows up most clearly in DFT® wire, short for drawn filled tube. A tube of one metal is filled with a core of another, and the two are drawn down together. According to the company, the force of drawing forms a mechanical bond, so the result behaves like one sound wire. The goal is properties no single metal offers, without a thicker wire. For a pacing lead or a stent, where every fraction of a thousandth of an inch counts, that's the appeal. The designer gets strength from one metal and conductivity or visibility from another, in a single strand that can be coiled or braided like ordinary wire.

A sheath of 35N LT®, a cobalt-nickel-chromium alloy, around a silver core gives a lead wire both fatigue strength and conductivity. Nitinol around platinum or tantalum gives a superelastic wire that shows up under X-ray. The part numbers spell out the recipe: in 35N LT®-DFT®-28%Ag, silver makes up 28% of the cross-section. Fort Wayne Metals has made DFT wire for more than 30 years, for cardiac pacing leads, neurovascular stents, aneurysm coils, shock coils, retrieval baskets and LVAD driveline cables.

Other products grew out of the same craft. HHS® tube is its take on a torque coil — a hollow strand of up to 18 filars in one to three layers that pushes and turns without whipping or kinking while leaving an open channel down the middle. NDR® wire uses a proprietary heat and mechanical treatment that refines the microstructure at the nanoscale, which the company says improves fatigue life without changing the wire's other physical properties. Round wire starts at 0.0005 inch, and up to nine wires can be wound onto one braider bobbin for catheter braiding.

The published ranges give a sense of how small this work gets. DFT wire runs from 0.0007 to 0.0126 inch in diameter, or smaller depending on the materials. HHS tube comes with inside diameters from 0.003 to 0.087 inch, filars down to 0.001 inch and lengths up to 120 inches. Flat wire can be rolled or drawn to a minimum thickness of 0.0005 inch, typically at width-to-thickness ratios between 3:1 and 10:1. The sheath and core can be mixed from a long menu — 35N LT®, MP35N®, nitinol, titanium or platinum alloys outside, and silver, gold, platinum, tantalum or nitinol inside — which is a big part of why the same basic process ends up in such different devices, from leads that carry current to coils that need to be seen on a fluoroscope.

Far from the cath lab

Not every customer is in medtech. Fort Wayne Metals has worked with NASA's Glenn Research Center on nitinol for prototype spring tires for Mars rovers, and in 2023 the two began developing nitinol for rover tires meant to handle the cold and unknown terrain at the Moon's South Pole. A NASA notice for follow-on work names Fort Wayne Metals as the sole source for shape memory wire that performs down to 40 kelvin, or −233°C.

A new owner, and new partners

The family chapter closed this summer. Axel Johnson Inc., a family-owned investment company based in New York, first invested in Fort Wayne Metals in 2021, and on July 1 it completed its purchase of 100% of the company from the Glaze family. Jeremy Rohrs is CEO, and headquarters stays in Fort Wayne. Ten days later, the company confirmed plans to invest $18.5 million locally and add 150 jobs in northeast Indiana.

In June 2025, Fort Wayne Metals and four other companies launched PRIME (PRoficient Ingot Material Evaluation). Fort Wayne Metals melts the ingot, EUROFLEX and Vascotube draw it into tubing, and ADMEDES and MeKo MedTech turn the tubing into device components. The group says it will test material together at every stage and publish joint technical papers, with the aim to "prevent monopolistic dependencies and mitigate future supply risks" for parts like stents and heart valve frames.

On quality, BSI certifies the U.S. operation to EN ISO 13485:2016; TÜV certifies the U.S. and Irish operations to AS9100D and ISO 9001:2015; and the Fort Wayne and Columbia City labs are A2LA-accredited to ISO/IEC 17025:2017.

The arc here is a familiar one in manufacturing. A company learns one hard process well, follows it into whatever market needs that process next, and eventually pulls the upstream steps in-house to control quality. The PRIME partnership adds a further step. Having integrated the melt, Fort Wayne Metals is now formally linking it with the companies downstream through PRIME, a shared and jointly tested supply chain for an alloy where material consistency matters a great deal.

Specs at a glance

### Sources

Disclaimer: This article is put together on a best-effort basis from publicly available information, including company websites, press releases, and trade publications, as of the date of publication. Specifications, certifications, products, and company details can change, so confirm anything important directly with the supplier. Opinions are the author’s own. Mentions of a company, product, or marketplace are not endorsements or sponsorships, and nothing here is professional, engineering, regulatory, or purchasing advice.

Back to all posts
Supplier Spotlight: How a Wire-Recorder Company Ended Up Melting Nitinol | Citron